thermal ageing
英 [ˈθɜːml ˈeɪdʒɪŋ]
美 [ˈθɜːrml ˈeɪdʒɪŋ]
网络 热老化
双语例句
- Effects of Rare Earth Oxides on Thermal Ageing Resistance of Methyl Vinyl Silicone Rubber
稀土氧化物对提高甲基乙烯基硅橡胶耐热性的作用 - Analysis for thermal ageing problem of resin cast dry-type transformers
树脂浇注干式变压器热老化问题的分析 - Research on Thermal Ageing Behavior of Casting Duplex Stainless Steel for Nuclear Power Plant
核电用铸造双相不锈钢热老化行为研究 - The thermal ageing properties in air and adhesion at200 ℃ of the heat curing fluorosilicone adhesive were investigated.
研究了氟硅橡胶胶粘剂的热空气老化性能和高温粘接性能。 - The changes of the structure, physical and mechanical properties of POMs containing ZnO or carbon black under UV irradiation, thermal ageing and hot water ageing were studied.
采用炭黑和纳米级氧化锌两种光屏蔽剂对共聚甲醛进行耐老化改性，对比了改性前后聚甲醛耐紫外光、耐热氧及耐热水老化性能的变化。 - The effect of vulcanization time and vulcanization systems on thermal ageing property of the clay-rubber masterbatch were investigated by air oven ageing test and thermal analysis.
用热空气老化试验和热分析法讨论了硫化时间和硫化体系对粘土胶热氧老化性能的影响。 - When the clay-rubber masterbatch was vulcanized by semi-efficient vulcanization system and efficient vulcanization system, better thermal ageing resistance could be obtained.
采用有效硫化体系和半有效硫化体系硫化粘土胶可以使其具有较好的热氧老化性能。 - Low interfacial tension may be kept after oil sand adsorption and thermal ageing in the system.
体系经油砂吸附和热老化后仍能保持较低的界面张力。 - A Study of Thermal Ageing Properties of SBR Modified Bitumen by High Performance Gel Permeation Chromatography
高效凝胶色谱研究丁苯橡胶改性沥青的热老化性能 - The AO-1 antioxidant, with good thermal ageing property, thermal stability, and light stability, is a thio-biphenyl type high-efficient major antioxidant without pollution.
AO-1抗氧剂具有良好的热老化性、热稳定性和光稳定性，是一种非污染的硫代双酚型高效主抗氧剂。 - Study on Mechanical and Thermal Ageing Property EPDM-g-MAH/ CaCO_3 Composites
EPDM-g-MAH/CaCO3复合材料力学及热老化性能的表征 - Study of the Equalized Method of Thermal Ageing Process
等效热老化过程法（EAP法）的研究 - This paper presents the composition of modified furan resin sand-consolidating agent ( aqueous dispersion) and the effects upon cemented sand strength and permeability of compostion variables, setting temperature, thermal ageing, original sand pack permeability, liquid media, and steam errosion.
本文报道了改性呋喃树脂固砂剂的组成及各种配方变量、固化温度、热老化、岩芯原始渗透率、介质浸泡、蒸汽冲刷等对固结砂岩芯抗压强度和渗透率的影响。 - The influence of lignin on the cure characteristics, dynamic and mechanical properties, thermal ageing properties and the morphology of GRP/ NR system were examined.
也有人研究用木质素作胶料的稳定剂，它显示出具有防老剂的性能。本研究考察了木质素对GRP/NR体系力学和老化性能以及形态学的影响。 - This paper studied thermal ageing properties of two kinds of SBR modified bitumen ( SBR MB) and a kind of SBR modified bitumen ( SBS MB).
以热空气老化法对直接混溶法和母料法制备的两种丁苯橡胶（SBR）改性沥青和一种SBS改性沥青的老化性能进行了研究。 - According to the theorem of heat-oxygen ageing, thermal life evaluation parameters and test method is chosen reasonably. The performance of thermal ageing of ethylene-propylene rubber insulation for production is evaluated practically.
根据热氧老化原理，合理地选择了热寿命评定参数和实验方法，实际的评定了产品应用的乙丙橡皮绝缘的热老化性能。 - The influence of thermal ageing on the crosslink density, relative number of crosslinking bonds ( RNB) and percent gel are studied by high temperature accelerated ageing tests.
本文用高温加速的方法研究热氧老化对丁羟基复合固体推进剂交联度、相对交联度和凝胶百分数的影响。 - The property of interfacial tension in oil displacement system through rock absorption and thermal ageing is investigated.
考察了驱油体系经岩石吸附和热老化以后的界面张力特征； - The linear regression equation of the physical performance of the ethylene-propylene rubber with time was established base on the results of thermal ageing test.
通过某导弹用乙丙橡胶的热老化试验数据，建立了物理性能与贮存时间的线性回归方程，并利用该方程预测了其在海南环境下物理性能的变化情况。 - Emphatically, FDT was utilized to observe low temperature drawing performance of SBS modified asphalt. The effects of some factors were evaluated, such as the property of matrix asphalt, the kind and content of polymer, thermal ageing, and the low temperature performance.
利用测力延度试验着重观察了SBS改性沥青的低温拉伸性能，探讨了基质沥青性质、聚合物种类和含量、热老化等因素对改性沥青低温性能的影响。 - The effect of thermal ageing on the magnetic susceptibility of a duplex stainless steel has been studied.
研究了热时效对副复式不锈钢磁敏感性的影响。 - The mechanical and rheological properties, compression set and thermal ageing of powder PP/ EPDM blend were studied.
研究了粉末PP/EPDM共混型热塑性弹性体的力学性能、热老化性能、压缩永久变形及流变性能。 - Effects of modified self-adhesive asphalt on thermal ageing of EPDM waterproof sheets were studied by way of thermal gravity analysis and dynamic thermal mechanical analysis.
采用热重分析和动态热机械分析方法研究了改性自粘沥青对三元乙丙防水片材热老化的影响。 - With the deepening of thermal ageing embrittlement, the critical crack size of pressure parts will decrease, which will weaken the wholeness of the pressure boundary in the primary loop.
随着热老化程度的加深，压力部件的临界裂纹尺寸会下降，将削弱一回路压力边界的完整性。 - The thermal ageing time has significant influence on strength and plasticity at room-temperature and tensile strength at high temperature of domestic steel, and so is long thermal ageing time on tensile strength at room-temperature and strength and plasticity at high temperature of French steel.
热老化时间对国产钢管的室温强塑性及高温抗拉强度有显著性影响，长时间热老化对法国钢管室温拉伸强度及高温强塑性的影响显著。 - For both domestic and French steels with the same thermal ageing time, the tensile properties at room-temperature are better than that at high temperature.
在相同的热老化时长下两种钢的室温拉伸性能均优于高温性能。 - Thermal ageing test of PE/ MMT nanocomposites is studied.
本文对聚乙烯/蒙脱土纳米复合材料进行了热老化试验。 - The plastically deforming area of room temperature impact macro-scope fracture gradually reduces with the prolong of the thermal ageing time.
铸造双相不锈钢的室温冲击宏观断口塑性变形区随热老化时间的延长逐渐减小。